top of page

You will receive the cable cut to the desired total length.

 

One cable for all Tree products - whether motion detectors, actuators or LED spots: With the new Loxone Tree Cable, you can install and commission all Loxone products in a flash. The standardized color code minimizes installation errors and thus saves valuable time on the construction site.

 

Read our blog post:  Tree cable - one cable for all Tree products

 

  • Universally applicable for all Tree products
  • Cardboard box with winding to avoid twist
  • Accurate color coding
  • 200m high quality copper cable
  • 2x1.5mm² finely stranded copper conductor (orange / white)
  • 2x0.6mm² solid copper conductor (orange / white)
  • 2x0.6mm² single wire (green / white)
  • Suitable for tree communication
  • CPR class Eca

 

The ideal cable for all Tree products

Thanks to the high security standards, the Loxone Tree Cable can be used for installation in private households as well as in public facilities. It is ideally suited for the communication of all Tree products as well as for the power supply of the respective components.

Certified according to the highest security standards

Certified according to the highest standards of the Building Products Regulation (CPR class B2ca-s1a, d1, a1), the Loxone Tree Cable meets all the requirements for installation in home and commercial properties in the EU. 

Areas of application: 

  • Private buildings
  • Buildings with usage units for care or needy assistance
  • Hospitals
  • Day care facilities for children, the disabled and the elderly
  • Structural systems for the storage of substances with an increased risk of fire
  • Server rooms
  • and much more

 

Tree sensors

Peripheral products like  Motion detector,  Touch pure  and  Actuators  are connected to the tree branch via the twisted green / white wire pair.
The power consumption of peripheral products is very low. This is why the twisted orange / white wire pair is ideally suited for the power supply.

Tree consumer

Tree products that serve as consumers usually require a power supply that can carry more power. This is for example with lighting products like the  LED spots  and the  LED RGBW dimmers, the case. Especially for these products, the tree cable is equipped with two 1.5mm² orange / white wires in addition to the two twisted wire pairs. This means that there is always enough power to reliably supply Tree consumers.

 

Avoid errors through clear color coding

All Tree products are consistently equipped with the same color code. The green / white terminals always stand for the Loxone Tree communication and the orange / white terminals for the 24 VDC power supply.

The tree cable also has the same color coding. This avoids errors in the wiring and provides a clear overview at all times when the system is expanded.

 

Simply wired up. Fully scalable.

Tree technology offers full flexibility when it comes to choosing the topology. The tree extension forms the “trunk” to which up to 50 tree products can be connected per tree branch via the tree cable. The cabling can be designed individually from device to device. Our recommendation: Pull a tree cable from the tree extension into the respective room and distribute it from there to the individual tree components.

 

scope of delivery

1x selected length of tree cable by the meter

(The number of products in the shopping cart determines the total length e.g. 3x 10m = 30m total length)

 

You might also be interested in

Tree cable (200m)

All Loxone Tree Products

Tree Cable (10m)

PriceFrom €24.92
Excluding VAT
new hits
bottom of page